Pro Mini Microcontroller Circuit Board Module 5V/16Mhz
Warning: Last items in stock!
This item has been sold
|- Digital I/O Pins||14|
|- Analog Input Pins||6|
|- PWM Digital I/O Pins||6|
|- Input Voltage (recommended)||5-12 Volt|
|- Operating Voltage||5 Volt|
|- DC Current per I/O Pin||40 mA|
|- Flash Memory||32 kb|
|- Flash Memory for Bootloader||0.5 kb|
|- SRAM||2 kb|
|- EEPROM||1 kb|
|- Depth (mm)||6 mm|
|- Length (mm)||30 mm|
|- Width (mm)||17.5 mm|
The Pro Mini is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
The Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.
No customer reviews for the moment.