Mega 2560 R3 Development Board w/USB
Warning: Last items in stock!
This item has been sold
|- Digital I/O Pins||54|
|- Analog Input Pins||16|
|- PWM Digital I/O Pins||14|
|- Input Voltage (recommended)||7-12 Volt|
|- Input Voltage (limit)||6-20 Volt|
|- Operating Voltage||5 Volt|
|- DC Current per I/O Pin||40 mA|
|- DC Current for 3.3V Pin||50 mA|
|- Flash Memory||256 kb|
|- Flash Memory for Bootloader||8 kb|
|- SRAM||8 kb|
|- EEPROM||4 kb|
|- Cable Length||0.3 Meter|
|- Depth (mm)||12.0 mm|
|- Length (mm)||101.5 mm|
|- Width (mm)||53.4 mm|
|- Weight||25 - 50 gram|
The Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Uno, Duemilanove or Diecimila.
The Mega 2560 is an update to the Mega, which it replaces.
Additional features coming with the R3 version are: