Pro Mini


New product

Pro Mini Microcontroller Circuit Board Module 5V/16Mhz

More details

This product is no longer in stock

This item has been sold



Add to wishlist

This product is covered by .
This product is covered by                 .

Data sheet

- Model Atmega328
- Digital I/O Pins 14
- Analog Input Pins 6
- PWM Digital I/O Pins 6
- Input Voltage (recommended) 5-12 Volt
- Operating Voltage 5 Volt
- DC Current per I/O Pin 40 mA
- Flash Memory 32 kb
- Flash Memory for Bootloader 0.5 kb
- SRAM 2 kb
- EEPROM 1 kb
- Depth (mm) 6 mm
- Length (mm) 30 mm
- Width (mm) 17.5 mm

More info

The Pro Mini is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

The Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.





everything was great except need to solder it yourself


Can use another arduino to program this

Clone of the arduino pro mini except for some pin change it is the same as the original. Some said this is the 3.3V version with a regulator but I didn't measure the output, read other comments for details. If you have another arduino, you don't really have to buy a usb-ttl converter in order to program this, I have a mega 2560 on my hand and I use it as ISP for the pro mini. How to program using mega(maybe this is an old method, but it works, who cares:D):

Write a review

Pro Mini

Pro Mini

Pro Mini Microcontroller Circuit Board Module 5V/16Mhz

Customers who bought this product also bought:

18 other products in the same category: